Perancangan Mesin CNC Acrylic Cutting 3 Axis Dengan Menggunakan Laser Tube CO2
Abstract
Almost all activities are carried out with the help of technology. It is as if technology has become a basic need for human life today. Of all the areas that have made progress, machinery is the one that has had the greatest effect. Lots of machines have emerged with new innovations with very diverse functions, one of which is the Computer Numerical Control (CNC) machine. A CNC machine is a machine used in the manufacturing industry to quickly produce large quantities of components for the engineering sector. As the name of the CNC itself, every work from CNC uses a computer system that has been well formed to produce goods that are in accordance with what is desired. Departing from some of the problems above, the author concluded to make a similar technology at a much cheaper price with a more practical work system, therefore the author made a 3 Axis Acrylic Cutting CNC Machine Using a CO2 Laser Tube".
References
Fauzan, A., Soegiharto, H., Prasetyawan, A. T., & Zain, A. I. (2019). Perancangan Mesin Plotter Batik Berbasis Computer Numerical Control ( Cnc ). Seminar Nasional Teknologi Dan Rekayasa (SENTRA), 139–151.
D. S. Widodo et al., “Rancang Bangun Mesin CNC 3- Axis Berbasis Mikrokontroler Arduino,” pp. 300–308, 2019.
A. S. dan K. Suharto, Kunto Purbono, “Grafir Batu Alam dengan Mesin CNC Router untuk Meningkatkan Ragam Produk Kreatif Indonesia,” vol. 7, no. 2, pp. 1– 7, 2017.
A. Eko and M. Darwis, “Rancang Bangun Mesin Laser Engraver and Cutter Untuk Membuat Kemasan Modul Praktikum Berbahan Akrilik,” vol. 2, no. 1, pp. 40–50, 2020.
Whitehouse, David R. 1993. Guide To Laser Materials Processing, Laser Institute of America.
Giri Halim. 2022. Analisa kerja mesin CNC laser cutting CO2 2 Axis berbasis MACH3 pada variasi pemotongan. Armatur Vol. 3 No. 1. ISSN (cetak): 2722-080X, ISSN (online): 2722-0796
Amala, M., Widiyanto S.A. 2015. Pengembangan Perangkat Lunak Sistem Operasi Mesin Milling CNC Trainer,JTM. Vol. 2 (3), Hal 204-210
Yenny Toguan Samarya. 2013. Aplikasi Laser Co2 Untuk Pemotongan (Cutting) Material Menggunakan. JSF volume 1 no.1
Agus Sudarmanto, S. I. (2011). Rancang Bangun Pengendali Motor Stepper untuk Deteksi Jumlah Objek Putar dengan Menggunakan Komputer. Berkala FISIKA UNDIP, 1-6.
Rifai, A., Gunawan, U.S., dan Putra, I.M., 2011. "Rancang Bangun Pengatur Gerak Motor Stepper untuk Peralatan Brakiterapi". Jurnal Perangkat Nuklir, vol. 5, No. 2.
