Rancang Bangun Alat Ukur Torsi dan Putaran Untuk Pengujian Turbin Savonius Pada Wind Tunnel Berbasis mikrokontroler
Abstract
The objective of this research is to design and develop a torque measurement device using a braking system and a rotational speed measurement tool for a Savonius turbine shaft, applied in a wind tunnel, with data acquisition controlled by an Arduino Uno microcontroller. The methodology employed in this research is the design and build method. The testing results indicate that the torque measurement device controlled by the Arduino Uno functions effectively. Comparing the results of braking force measurements using manual methods and data acquisition revealed a 2, 231 % error. Additionally, the rotational speed measurements using a tachometer and those using an encoder controlled by the Arduino Uno showed a small error of 0,59 %. Data were continuously monitored on a laptop screen during testing. Thus, this device can be utilized as an auxiliary measurement tool to assess the performance of a Savonius turbine
References
R. Sumiati, S. Pengajar, J. Teknik, M. Politeknik, and N. Padang, “Pengujian Turbin Angin Savonius Tipe U Tiga Sudu Di Lokasi Pantai Air Tawar Padang,” Penguji. Turbin Angin Savonius Tipe Utiga Sududi Lokasi Pantai Air Tawar Padang, vol. 1, no. 1, pp. 27–23, 2012, [Online]. Available: www.reuk.co.uk/Savonius-Wind-Turbines.htm
K. R. Abdelaziz, M. A. A. Nawar, A. Ramadan, Y. A. Attai, and M. H. Mohamed, “Performance improvement of a Savonius turbine by using auxiliary blades,” Energi, 2021, doi: 10.1016/j.energi.2021.122575.
M. B. Salleh, N. M. Kamaruddin, and Z. Mohamed-Kassim, “The effects of a deflector on the self-starting speed and power performance of 2-bladed and 3-bladed Savonius rotors for hydrokinetic application,” Energi Sustain. Dev., vol. 61, pp. 168–180, 2021, doi: 10.1016/j.esd.2021.02.005.
A. S. Grinspan, U. K. Saha, and P. Mahanta, “Experimental investigation of twisted bladed savonius wind turbine rotor,” Int. Energi J., vol. 5, no. 1, pp. 1–9, 2004.
N. Alom and U. K. Saha, “Performance evaluation of vent-augmented elliptical-bladed savonius rotors by numerical simulation and wind tunnel experiments,” Energi, vol. 152, pp. 277–290, Jun. 2018, doi: 10.1016/j.energi.2018.03.136.
Frank M. White, “Fluid Mechanics,” 2011.
L. B. Kothe, S. V. Möller, and A. P. Petry, “Numerical and experimental study of a helical Savonius wind turbine and a comparison with a two-stage Savonius turbine,” Renew. Energi, vol. 148, pp. 627–638, 2020, doi: 10.1016/j.renene.2019.10.151.
Y. Kurniawan, D. D. D. P. Tjahjana, and B. Santoso, “Experimental Studies of Performance Savonius Wind Turbine with Variation Layered Multiple Blade,” in IOP Conference Series: Earth and Environmental Science, Jul. 2020, vol. 541, no. 1. doi: 10.1088/1755-1315/541/1/012006.
W. T. Chong et al., “The experimental study on the wind turbine’s guide-vanes and diffuser of an exhaust air energi recovery system integrated with the cooling tower,” Energi Convers. Manag., vol. 87, pp. 145–155, 2014, doi: 10.1016/j.enconman.2014.07.009.
Y. Kurniawan, D. D. D. P. Tjahjana, and B. Santoso, “Experimental Studies of Performance Savonius Wind Turbine with Variation Layered Multiple Blade,” IOP Conf. Ser. Earth Environ. Sci., vol. 541, no. 1, 2020, doi: 10.1088/1755-1315/541/1/012006.
A. Kianifar, M. Anbarsooz, and M. Javadi, “Blade curve influences on performance of Savonius rotors: Experimental and numerical,” Am. Soc. Mech. Eng. Fluids Eng. Div. FEDSM, vol. 1, no. PARTS A, B AND C, pp. 905–911, 2010, doi: 10.1115/FEDSM-ICNMM2010-30919.
R. Sumiati, U. G. S. Dinata, and D. A. Saputra, “Enhancing the Performance of Savonius Rotor Using Tiered-Height Zigzag Patterns in Concave Surface,” J. Appl. Eng. Sci., vol. 22, no. 1, pp. 113–122, 2024, doi: 10.5937/jaes0-46250.
A. Sunarso et al., “Pengembangan Sistem Akuisisi Data Otomatis Berbasis Arduino Untuk Alat Uji Unjuk Kerja Turbin Air,” J. Otomasi Kontrol dan Instrumentasi, vol. 11, no. 2, pp. 108–119, 2019, doi: 10.5614/joki.2019.11.2.4.
Mohammad Alexin Putra and Yoga Ade Priatna, “Alat Ukur Daya Untuk Turbin Angin Sumbu Vertikal,” pp. 9–14, 2020, [Online]. Available: https://eprints.itenas.ac.id/836/1/Alat Ukur Daya Untuk Turbin Angin Sumbu Vertikal.pdf
R. I. S. and H. Hartono, “Rancang Bangun Sistem Pengukuran Keccepatan Putar Generator Pada Turbin Angin Menggunakan Optocoupler Berbasis Mikrokontroler ATMEGA8535,” J. Penelit., vol. 3, no. 3, pp. 29–35, 2018, doi: 10.46491/jp.v3e3.53.29-35.
