Kinerja Batu Kapur Terhadap Nilai Califonia Bearing Ratio (CBR) Lapis Pondasi Perkerasan Jalan

  • Enita Suardi Politeknik Negeri Padang
  • Lusyana Lusyana Politeknik Negeri Padang
  • Mukhlis Mukhlis Politeknik Negeri Padang
  • Muhammad Fauzan Politeknik Negeri Padang
  • Kamilia Zain Politeknik Negeri Padang
Keywords: Limestone, aggregate foundation layer, Abration, CBR

Abstract

Flexible Pavement is one of the road pavement constructions. In order for the flexible pavement to have adequate carrying capacity and durability to carry the load acting on it, the pavement is made in layers. The top layer is called the surface layer and below it is an aggregate foundation layer which is placed on top of the compacted subgrade. The material used as an aggregate foundation layer usually consists of crushed stone. However, seeing the abundance of limestone in Bukit Karang Putih, Indarung is expected not only to be used cement manufacture, but can be used as a substitute for the aggregate foundation layer. This research was conducted on the aggregate foundation layer of class A and the aggregate foundation layer of class B. Variations of mixture with limestone substitution in the aggregate foundation layer of class A and class B aggregate are 0%, 10% and 20%. The tests carried out include abrasion, compaction and CBR. The lowest abrasion test results for grade A aggregate foundation layer is 30.69%, while for grade B aggregate foundation layer is 31.79%. The results of the CBR test for class A aggregate foundation layers obtained the highest value for 10% limestone substitution, which is 75%, as well as for class B aggregate foundation layers, the highest value for 10% limestone substitution was 61%. The results of the CBR test that meet the requirements are found in the class B aggregate foundation layer, which is at least 60%.

References

Alit, I. M., Salain, K., Dodiek, M., Ardana, W., & Tahriri, D. W. (2009). Pengaruh Asam Karbonat (H 2 CO 3) Terhadap Kekuatan Tumbukan Agregat Batu Kapur. In Jurnal Ilmiah Teknik Sipil (Vol. 13, Issue 2).

Aziz, M. (2010). Batu Kapur Dan Peningkatan Nilai Tambah Serta Spesifikasi Untuk Industri. JurnalTenologi Mineral Dan Batubara, 6, 116–131.

Baihaqi, F., & Effendi, R. (2019). Pengaruh Variasi Campuran Agregat Kelas A terhadap Koefisien Permeabilitas Horizontal. Buletin Profesi Insinyur, 2(1), 29–35. https://doi.org/10.20527/bpi.v2i1.48

Fthurrozi, & Sukmawan, F. (2020). Uji Kualitas Material Lapis Pondasi Agregat Kelas A Pada Tumpukan Material Yang Berasal Dari Bentok Dan Awang Bangkal Pada Pekerjaan Jalan Hercules Kecamatan Landasan Ulin. 4, 61–69.

Hastari Agustina, D., & Latul, Y. (2019). Pengaruh Energi Pemadatan Terhadap Nilai Kepadatan Tanah. Sigma Teknika, 2(2), 202–206.

Lucky Budiman & Silvia Sukirman, Studi Penggunaan Batu Kapur Kalipucangsebagai Substitusi Sebagian Agregat Halus Beton AspalJenis AC-BC. RekaRacana : Jurnal Teknik Sipil Vol 4, No. 1

Yanette, Y., Ing, T. L., & Haris, S. (2010). Evaluasi Karakteristik Agregat Untuk Dipergunakan Sebagai Lapis Pondasi Berbutir. Jurnal Teknik Sipil, 6(2), 79–192.

Sari, K. I., & Tambunan, L. (2020). Studi Perbandingan Uji Pemadatan Standar Dan Uji Pemadatan Modified Terhadap Tanah Dari Jalan Pertahanan - Patumbak Yang Dicampur Kapur. Journal of Civil Engineering, Building and Transportation, 22–30.

Sugiarno & Indriawan Pratomo. (2003), Analisis Penggunaan Batu Kapur dan Pasir Batu sebagai Bahan Lapis Pondasi Bawah Struktur Perkerasan Jalan, Tersedia di :http://hdl.handle.net/123456789/3089

Ristanto, M. (2011). Pemanfaatan Batu Kuning (Dolomite Limestone) Sebagai Bahan Subbase Course Jalan Ditinjau Dari Besarnya Nilai kv Pada Pengujian Heavy Compaction dan CBR Dalam Kondisi Unsoaked. Universitas Sebelas Maret.

Published
2023-10-29
How to Cite
Suardi, E., Lusyana, L., Mukhlis, M., Fauzan, M., & Zain, K. (2023). Kinerja Batu Kapur Terhadap Nilai Califonia Bearing Ratio (CBR) Lapis Pondasi Perkerasan Jalan. Jurnal Ilmiah Rekayasa Sipil, 20(2), 190-199. https://doi.org/10.30630/jirs.v20i2.1198
Section
Articles

Most read articles by the same author(s)

<< < 1 2