Modifikasi Mesin Pengupas Kulit Pinang Kering
Abstract
Due to the weaknesses of some existing areca peelers, some modifications were made. Modifications were made to the gear stripper, the addition of the inlet funnel, the gear stripper cover, and the exit funnel. The purpose of this modification of the design of the areca nut peeling machine is to make it easier for areca-producing farmers to peel their skin. Engine design specifications, using a 1/2 HP motor with a speed of 1500 rpm, 2-inch, and 10-inch pulleys, and a capacity of 5.16 kg/hour. The result of this modification is stated to be able to perform stripping with a large capacity. This machine is expected to be able to meet the needs of manual areca nut peelers to increase productivity.
References
Yeza, P. A. 2014. Rancang Bangun Alat Pembelah Buah Pinang (Areca catechu, L.) Semi Mekanik [Skripsi]. Padang (ID) :Fakultas Teknologi Pertanian. Universitas Andalas
Arianto. 2007. Indonesia Tetap Jadi Produsen Pinang Terbesar di Dunia. Pemerintah Provinsi Sumatera Utara. diakses 19 Juni 2019 http://www.sumutprov.go.id/lengkap.php?id=683 diakses 9.00 wib
Wang CK, and Lee WH, 1996, Separation; Characteristics; and Biological Activities of Phenolics in Areca Fruit, J. Agric. Food Chem., 44, 2014 -2019
Berlina, R. 2007. Peluang Pemanfaatan Buah Pinang Untuk Pangan. Bul Palma. 33: 99-105.
Ferry, Y. 1992. Bertaman Pinang (Areca catechu). Kebun Percobaan Paya Gajah. Aceh Timur.
Ihsan Putra Erizal, Yuli Yetri, Nusyirwan, 2018, Perencanaan Perawatan Mesin Pengupas Kulit Pinang, Jurnal Teknik Mesin (JTM), Vol. 11, No. 1, 11 – 15
Sularso dan Suga,Kiyokatsu, 1997. Dasar Perancangan Dan Pemilihan Elemen Mesin, Jakarta: Pradya Pramita
Moot L. Robert. 2009. Elemen- elemen Mesin Dalam Perencangan Mekanis, Yogyakarta : Andi
Rochim, Taufiq, 1993. Teori & Teknologi Proses Permesinan, FTI-ITB, Bandung
R.S. Khurmi dan J.K. Cupta, 1982, Text Bok of Machine Design.
