Rancang Bangun Multi Archimedes Screw Turbine Parallel
Keywords:
Archimedes screw turbine, renewable energy, ransmission system, tilt angle, pico hydroAbstract
As an environmentally friendly application of renewable energy, pico-hydro power plants are a prime option, especially for remote areas with sufficient water flow. However, the effectiveness of pico-hydro power remains a matter of debate, particularly regarding the angle and rpm required to generate sufficient electrical power. The method is carried out by designing and building a multi-Archimedes screw turbine prototype that applies a transmission system to improve the performance of the turbine rotation in parallel. The test results show that the 45-degree turbine tilt angle configuration produces a turbine rotation of 97 rpm, which indicates optimal efficiency in utili
References
Jabar, M.A., 2020. Analisis Efisiensi Keluaran Energi Listrik Prototipe Sistem Pembangkit Tenaga Pico Hydro Menggunakan Jenis Turbin Archimedes Screw. Jurnal Mechanical, 11(2), pp.36–43.
Nugraha, A., 2022. Analisis Kinerja Turbin Archimedes Screw Pada Pembangkit Listrik Tenaga Mikro Hidro. Jurnal Teknik Mesin, 9(1), pp.48–56.
Rahmat, A.R., 2022. Pembuatan Turbin Ulir Archimedes Tenaga Mikrohidro. Jurnal Teknik Mesin Universitas Bung Hatta, 20 (2).
Lumbanraja, D.J., 2022. Desain Turbin Spiral Untuk Pembangkit Listrik Mikro Hidro Skala Laboratorium Daya 50 W. Skripsi Sarjana Teknik Mesin, Universitas Medan Area.
Setyawan, I., 2021. Perancangan Turbin Screw Archimedes Dengan Kapasitas Aliran 0.0125 m³/s, Head 0.64 m dan Simulasi Pengujian Statis Dengan Software SolidWorks 2018. Jurnal Teknik Mesin Universitas Gunadarma, 12(1), pp.15–22.
Susanto, B. and Widodo, A., 2021. Potensi Energi Aliran Sungai Ber-Head Rendah. Jurnal Energi Terbarukan, 15(3), pp.45–53.
Williams, A. and Smith, J., 2020. Archimedes Screw Turbine for Low Head Hydropower Applications. Renewable Energy Journal, 89, pp.456–466.
Putra, H.A. and Nurdin, M., 2021. Desain Turbin Archimedes untuk Aliran Sungai Head Rendah. Jurnal Teknik Mesin, 12(2), pp.78–85.
Santoso, D. and Rahmawati, L., 2022. Pengaruh Geometri pada Efisiensi Turbin Archimedes Screw. Indonesian Journal of Renewable Energy, 8(1), pp.32–40.
Yulianto, T., 2019. Pengaruh Sudut Sudu dan Pembebanan pada Turbin Archimedes Screw. Jurnal Energi Air, 7(2), pp.112–120.
Indarto, B., Ilhami, A.W., and Bustomi, M.A., 2020. Testing Low RPM BLDC Generator as Power Plant for Remote Areas. Journal of Physics: Conference Series, 528(1), pp.1–6.
Wibowo, S. and Setiawan, R., 2022. Analisis Efisiensi Turbin Archimedes pada Saluran Air Head Rendah. Jurnal Energi dan Lingkungan, 14(3), pp.65–72.
Hidayat, M. and Pratama, Y., 2023. Efisiensi Ganda pada Turbin Archimedes Screw dengan Konfigurasi Double Screw. Journal of Renewable Energy Systems, 11(4), pp.98–106.
Zamani, R.S.A.K.M., 2024. Enhancing Performance Evaluation of Archimedes Screw Turbines under Optimal Conditions: A Focus on Flow Rate Analysis, Empirical Equations, and Comparative Scaling Methods. Iranian Journal of Energy and Environment, 15(2), pp.123–134.
Slameto, B.S.E.F.B., 2020. Pembuatan dan Pengujian Turbin Ulir Dua Sudu. Jurnal Teknik Energi, 6(2), pp.547–550.
Iswanda, D.N.W.S., 2023. Pengaruh Head Inflow serta Sudut Sumbu Turbin terhadap Efisiensi dan Fenomena Aliran pada Turbin Ulir Dua Bilah. Jurnal Teknik Mesin Indonesia, 14(1), pp.22–30.
Zaira, J. and Naibaho, O., 2023. Rancang Bangun Pembangkit Listrik Pikohidro Menggunakan Turbin Screw Pada Aliran Danau PCR. Jurnal Teknik Mesin (JTM), 16(1), pp.1–8.
