Media Pembangkit Gelombang Skala Laboratorium

Jamiatul Akmal; Ahmad Suudi; Yoki Surya Grahita; Asnawi Lubis; Novri Tanti; Zulhendri Hasymi

doi:10.30630/jtm.16.2.1239

Jamiatul Akmal Jurusan Teknik Mesin, Fakultas Teknik Universitas Lampung
Ahmad Suudi Jurusan Teknik Mesin, Fakultas Teknik Universitas Lampung
Yoki Surya Grahita Jurusan Teknik Mesin, Fakultas Teknik Universitas Lampung
Asnawi Lubis Jurusan Teknik Mesin, Fakultas Teknik Universitas Lampung
Novri Tanti Jurusan Teknik Mesin, Fakultas Teknik Universitas Lampung
Zulhendri Hasymi Jurusan Teknik Mesin, Fakultas Teknik Universitas Lampung

DOI: https://doi.org/10.30630/jtm.16.2.1239

Keywords: Design, Wave Generation Media, Wave Characterization, Airy’s Theory

Abstract

In the design of offshore building structures, calculations are required by looking at the factors that occur in the ocean. A big factor that occurs is the disturbance force of waves which can disrupt the strength of the building structure to be created. For this reason, this research makes a wave generating media device on a laboratory scale. With this tool, efforts are also made to resemble the original wave, where the deeper it is, the smaller the strength of the wave formed. This effort is an implementation of the wave forms that occur in the open sea. The results of the design of a wave generating media device measuring 3690x830x940 mm. From wave observations and calculations, it was found that the wavelength was 0.5m and the amplitude was 0.01m. It was concluded that the type of wave characteristic produced by this tool was categorized as an airy wave.

References

X. Cheng, Y. Wang, and G. Wang, 2012, Hydrodynamic Forces on a Large Pipeline and a Small Pipeline in Piggyback Configuration under Wave Action, Journal Waterway Port Coastal Ocean Engineering, Vol.138, No.5, pp.394 405.

X. Zan and Z. Lin,, 2020, “On the Applicability of Morison Equation to Force Estimation Induced by Internal Solitary Wave on Circular Cylinder”, Ocean Engineering, vol. 198, pp.106966

M. Lou, C. Yu, and P. Chen, 2015, Dynamic response of a riser under excitation of internal waves, Journal Ocean University China, vol. 14, no.6, pp.982 988

S. Chandrasekaran and K. Yuvraj, 2013, Dynamic analysis of a tension leg platform under extreme waves, JournalNaval Architecture Marine Engineering, vol.10, no.1, pp.59-68.

Akmal, J., Tanti, N., Lubis, A. Intan, D. F. K, 2022, Respon Dinamis Tension Leg Platform (TLP): Studi Komparasi Antara Penggunaan Ponton Telapak Lingkaran dengan Ponton Telapak Bujur Sangkar, Machine; Jurnal Teknik Mesin Vol. 8 No. 1 A.

Akmal, J., Lubis, A., Su'udi, A., Tanti, N., Nugraha, N., Fahrain, Z. A., & Hakim, P. F., 2017, Hydrodynamic Forces on Submerged Floating Tube: The Effect Of Curvature Radius And Depth Level Kapal: Jurnal Ilmu Pengetahuan dan Teknologi Kelautan, Vol. 19 No. 1 pp.1-8.

Nadia Friska Marelsa1, Yosyea Oktaviandra, 2019, Analisis Karakteristik Gelombang Laut Menggunakan Software Windwave-12 (Studi Kasus: Kepulauan Mentawai), Oseana, Vol. 44, No. 2 pp. 10 - 24

Pahl.G, W.Beitz, J. Feldhusen. K.-H Grote. 2007, Engineering design A Systematic Approch Third Edition.. London Springer.

Sundar, V. 2016. Ocean Wave Mechanics: Applications in Marine Structures. John Wiley & Sons Ltd.

Akmal, J., Magnolia, A., Suudi, A., Tanti, N., Lubis, A., 2010, Identifikasi Kinematika Partikel Air dan Karakterisasi Gelombang Ombak Dengan Metode Video Tracker, Jurnal Teknik Mesin Indonesia, Vo..18, No.1, pp 24-28.

Sarpkaya, T. 2010. Wave forces on offshore structures. Cambridge university press.

Le Méhauté, B., 1976. An Introduction to Hydrodynamics and Water Waves (Springer Study Edition). Springer-Verlag Berlin Heidelberg.