Optimalisasi Pengiriman Batubara ke Pabrik dengan Perancangan Safety Block pada Chute Belt Conveyor 5F2J05
Keywords:
Belt conveyor, batubara, block, material tumpah, safety block.Abstract
Block material batubara pada chute belt conveyor 5F2J05 menyebabkan pengiriman batubara ke pabrik PT. Semen Padang kurang optimal sehingga diperlukan perancangan dan pemasangan alat pendeteksi terjadinya block pada chute. Alat pendeteksi ini memberikan sinyal alarm saat terjadi block dan langsung menyetop belt conveyor 5F2J05 sehingga material tidak banyak menumpuk dan tumpah dari chute. Safety block ini bekerja dengan cara memanfaatkan dorongan material batubara ketika terjadi block yang akan menggerakkan sebuah plate dan diteruskan untuk menekan sensor limit switch untuk menyetop peralatan. Downtime belt conveyor 5F2J05 untuk pembersihan saat terjadi block berkurang dari 60 menit menjadi 15 menit. Jumlah waktu yang bisa di optimalisasi adalah 45 menit sehingga pengiriman batubara bisa dioptimalkan dari sebelum pemasangan alat ini sebanyak 375 ton setiap terjadinya block material. Penggunaan alat pendeteksi terjadinya block material ini efektif dan efisien untuk digunakan pada peralatan belt conveyor yang ada di jalur transport Batubara di PT. Semen Padang.
References
[1] P. Bortnowski, H. Gondek, R. Król, D. Marasova, and M. Ozdoba, "Detection of blockages of the belt conveyor transfer point using an RGB camera and CNN autoencoder," Energies, vol. 16, no. 4, Art. no. 1666, 2023, doi: 10.3390/en16041666.
[2] J. Li, Y. Tan, S. Zhou, S. Yan, and J. Zhang, "Discrete element simulation of vibration-assisted chute to prevent blockage of viscous materials," Processes, vol. 13, no. 9, Art. no. 2819, 2025, doi: 10.3390/pr13092819.
[3] S. Bahrun, M. S. Yusoff, M. S. Said, and A. Hassan, "Coal flowability control on preventing spillage on conveyor belt through modeling and simulation for improving its performance," J. Adv. Res. Fluid Mech. Therm. Sci., vol. 90, no. 1, pp. 130–145, 2022, doi: 10.37934/arfmts.90.1.130145.
[4] A. Rzeszowska, R. Błażej, and L. Jurdziak, "Non-destructive testing for conveyor belt monitoring and diagnostics: A review," Appl. Sci., vol. 15, no. 24, Art. no. 13272, 2025, doi: 10.3390/app152413272.
[5] M. S. Mahmood and I. R. Shareef, "Applications of artificial intelligence for smart conveyor belt monitoring systems: A comprehensive review," J. Eur. Syst. Autom., vol. 57, no. 4, pp. 1195–1206, 2024, doi: 10.18280/jesa.570426.
[6] F. Alharbi, S. Luo, H. Zhang, K. Shaukat, G. Yang, C. A. Wheeler, and Z. Chen, "A brief review of acoustic and vibration signal-based fault detection for belt conveyor idlers using machine learning models," Sensors, vol. 23, no. 4, Art. no. 1902, 2023, doi: 10.3390/s23041902.
[7] F. Alharbi and S. Luo, "A review of fault detecting devices for belt conveyor idlers," J. Mech. Eng. Sci. Technol., vol. 8, no. 1, pp. 39–53, 2024, doi: 10.17977/um016v8i12024p039.
[8] P. Dabek, J. Szrek, R. Zimroz, and J. Wodecki, "An automatic procedure for overheated idler detection in belt conveyors using fusion of infrared and RGB images acquired during UGV robot inspection," Energies, vol. 15, no. 2, Art. no. 601, 2022, doi: 10.3390/en15020601.
[9] D. Bzinkowski, M. Rucki, L. Chalko, A. Kilikevicius, J. Matijosius, L. Cepova, and T. Ryba, "Application of machine learning algorithms in real-time monitoring of conveyor belt damage," Appl. Sci., vol. 14, no. 22, Art. no. 10464, 2024, doi: 10.3390/app142210464.
[10] Q. Fu et al., "Mixed image detection method of belt coal blockage and leakage based on improved RetinaNet mode," Discov. Appl. Sci., vol. 7, Art. no. 520, 2025, doi: 10.1007/s42452-025-07068-0.
[11] Z. Wang, D. Lu, E. Gao, Z. Huang, Y. Yang, and P. Li, "A coal loading height monitoring and blockage warning method for scraper conveyors based on multi-point state and time confirmation," EAI Endorsed Trans. Scalable Inf. Syst., vol. 13, no. 5, 2026, doi: 10.4108/eetsis.13972.
[12] Sularso and K. Suga, Dasar Perencanaan dan Pemilihan Elemen Mesin, 6th ed. Jakarta, Indonesia: Pradnya Paramita, 1987.
[13] F. S. Lelono and I. N. Gusniar, "Perancangan poros, pulley dan V-belt pada sepeda motor Honda Scoppy 110cc 2011," Patria Artha Technol. J., vol. 7, no. 1, pp. 8–14, 2023, doi: 10.33857/patj.v7i1.558.
[14] Z. Achmad, Elemen Mesin I. Bandung, Indonesia: Refika Aditama, 1999.
[15] SKF Group, Rolling Bearings Catalogue. Gothenburg, Sweden: SKF, 2018.