Efisiensi Rem Kendaraan Bermotor Mitsubishi L300 Tanpa Beban Dengan Variasi Persentase Tekanan Angin Ban

  • Muchlisinalahuddin Muchlis nalahuddin Teknik Mesin, Fakultas Teknik, Universitas Muhammadiyah Sumatera Barat
  • Sagyta Yeniza Putri Jurusan Teknik Mesin, Fakultas Teknik, Universitas Muhammadiyah Sumatera Barat
  • Riza Muharni Jurusan Teknik Mesin, Fakultas Teknik, Universitas Muhammadiyah Sumatera Barat
  • Dedi Wadianto Jurusan Teknik Mesin, Fakultas Teknik, Universitas Muhammadiyah Sumatera Barat
  • Desmarita Leni Jurusan Teknik Mesin, Fakultas Teknik, Universitas Muhammadiyah Sumatera Barat
Keywords: efficiency, vehicle, testing, brake tester, pressure

Abstract

This study aims to analyze the effect of differences in tire pressure on brake testing at the Unit Pelaksana Teknis Daerah (UPTD) Motor Vehicle Testing, Solok Regency, the implementation of this analysis is to find the efficiency and deviation of the braking force on the tool. Test Brake Tester as well as the condition and calibration of the Brake Tester optimally so that the results of the test equipment are accurate so as to reduce errors in the test results. This research was conducted at the Motor Vehicle Testing Building, Solok Regency, with this research it is expected to be able to find the effect of differences in tire pressure on the efficiency and storage of the braking force. From the analysis that has been carried out, it can be concluded that different tire pressures affect the efficiency and deviation of the braking force on the Brake Tester, so it is necessary to check the tires regularly and once a year calibration of the test equipment must be carried out correctly.

Author Biography

Muchlisinalahuddin Muchlis nalahuddin, Teknik Mesin, Fakultas Teknik, Universitas Muhammadiyah Sumatera Barat

Jurusan Teknik Mesin Fakultas Teknik

References

R. Sari, B. Riyanto, and Y. Basuki, “Pergeseran Pergerakan Angkutan Sungai Di Sungai Martapura Kota Banjarmasin,” J. Pembang. Wil. dan Kota, vol. 4, no. 2, pp. 223–223, 2008.

Y. Handoyo, “Analisis Performance Ban Dengan Alat Drum Test,” J. Ilm. Tek. Mesin Unisma “45” Bekasi, vol. 2, no. 1, p. 98103, 2014.

M. M. Muttaqin, “Pengaruh Tekanan Udara (Inflation Preassure) pada Tipe Radial Ply Terhadap Rolling Resistance,” Repository.Unej.Ac.Id/Handle, vol. 5, no. 1, 2015.

B. Setiyana, “Analisis Pengaruh Tekanan Dan Beban Pada Ban Tipe Radial Terhadap Rolling Resistance Kendaraan Penumpang,” Dep. Tek. Mesin Univ. Diponegoro, vol. 53, no. 9, pp. 1689–1699, 2017, [Online]. Available: e-mail: bsetiyana@yahoo.com

N. Halimatus Sa’diyah, H. Mariadi Kaharmen, and S. Shofiah, “Efisiensi Rem Kendaraan Isuzu Tld 24 C Dengan Variasi Beban Dan Tekanan Angin Ban,” J. Keselam. Transp. Jalan (Indonesian J. Road Safety), vol. 7, no. 2, 2020, doi: 10.46447/ktj.v7i2.208.

Prasetyadi, Juan., 2017, "Jenis atau Tipe Sistem Penggerak FR, FF, RR, MR, 4WD (FWD)" , http://www.teknik-otomotif.com/2017/03/jenis-atau-tipe-sistem-penggerak-fr-ff.html.

A. Sulaeman Rahman, “Pengaruh beban dan tekanan udara dalam ban terhadap reaksi maksimum ban sepeda motor roda belakang,” Dptm-Fptk-Upi Bandung, vol. 14, pp. 67–82, 2013.

M. M. Muttaqin, “Pengaruh Tekanan Udara (Inflation Preassure) pada Tipe Radial Ply Terhadap Rolling Resistance,” Repository.Unej.Ac.Id/Handle, vol. 5, no. 1, 2015.

M. I. Pasaribu, G. Putra, F. A. Anugerah, and Junaidi, “Mengukur Tekanan Udara Pada Ban Secara Otomatis Dengan Kecepatan Anemometer,” J. Teknol., vol. 15, no. December, p. 11, 2018.

A. Elfasakhany, “Tire Pressure Checking Framework: A Review Study,” Reliab. Eng. Resil., vol. 1, no. 1, pp. 12–28, 2019, [Online]. Available: http://www.rengrj.com/article_86929.html%0Ahttp://www.rengrj.com/article_86929_d04b9ae22d6025acaf5d430f72cb4718.pdf

I. G. E. Lesmana and T. H. Anugrah, “Analisis Pengaruh Sistem Rem Mobil Grandmax Pick Up Type S402Rp Terhadap Nilai Efisiensi Rem Pada Alat Uji Rem Iyasaka,” Pengaruh Sist. Rem Mob., pp. 1–7, 2019.

Samwijaya, D., Darmanto, D., & Syafa'at, I. (2019). Analisis keausan kampas rem pada disc brake dengan variasi lubang disc brake. Jurnal Ilmiah Momentum, 15(1). https://doi.org/10.36499/jim.v15i1.2658.

Published
2023-06-01
How to Cite
nalahuddin, M., Putri, S., Muharni, R., Wadianto, D., & Leni, D. (2023). Efisiensi Rem Kendaraan Bermotor Mitsubishi L300 Tanpa Beban Dengan Variasi Persentase Tekanan Angin Ban. Jurnal Teknik Mesin, 16(1), 78 - 82. https://doi.org/10.30630/jtm.16.1.896

Most read articles by the same author(s)