Analisis Perbandingan Sifat Mekanik Pegas Daun Baja SUP9 dan SUP9A Melalui Uji Kekerasan dan Struktur Mikro
DOI:
https://doi.org/10.30630/jtm.18.2.1959Abstract
Leaf springs are essential components in heavy vehicle suspension systems, serving to absorb shock loads and maintain vehicle stability. Prolonged service life can cause degradation of mechanical properties, which affects both safety and suspension performance. This study aims to analyze and compare the mechanical properties of used SUP9 and SUP9A steel leaf springs through Micro Vickers hardness testing and microstructural observation in accordance with ASTM E384-17. Samples were taken from a Hino Dutro (SUP9) and a Mitsubishi Canter (SUP9A), then prepared and analyzed using ImageJ software for phase quantification. The results showed that the hardness values of SUP9 (246 HV = 234 HB) and SUP9A (214 HV = 204 HB) were below the JIS G 4801 standard range (363–429 HB). The microstructure of SUP9 consisted of 80% pearlite, 15% ferrite, and <5% martensite, while SUP9A contained 70% pearlite, 25% ferrite, and <5% martensite. The higher pearlite content in SUP9 contributed to greater hardness, whereas the higher ferrite content in SUP9A increased ductility but reduced wear resistance. These findings indicate that both materials have undergone softening due to tempering effects from repeated loading, potentially reducing their ability to withstand shock loads and accelerating fatigue failure. Technical recommendations include re-heat treatment or component replacement to restore suspension performance and improve vehicle operational safety
References
Sialana, J., & Bunai, M., 2018. Analisa Sistem Suspensi Dan Kekuatan Pegas Daun (Leaf Spring) Pada Mobil Mitsubishi Fuso 125 Ps. Jurnal Teknik Mesin, 7 (1), pp. 19-31.
Krishnamurthy, K., Ravichandran, P., Naufal, A. S., Pradeep, R., HarishAdithiya, K. S., 2020. Modeling and structural analysis of leaf spring using composite materials. Materials Today: Proceedings, 33, pp.4228-4232.
Praditya, A. N. P., Winarto, F. E. W., 2024. Optimasi Perencanaan Penggantian Pegas Daun pada Truk Hino FM 260 Jd di PT PP Presisi Tbk Proyek Tol Indrapura–Kisaran. Jurnal Teknologi dan Rekayasa Alat Berat, 1(1), pp.25-29..
Kurniawan, P., Andoko, A., Sunu, P. W., 2021. Leaf spring type simulation with finite element method approach. IOP Conference Series: Materials Science and Engineering, 1034, 012015.
Hidayat, T., 2012. Analisa Kegagalan Pegas Daun (Leaf Spring) Pada Toyota Kijang Kapsul 7K-EI Tahun 2000. Jurnal Simetris, 1(1), pp.1-8.
Yamada, Y., Kuwabara, T., 2007. Materials for springs. Springer Science & Business Media.
Fragoudakis, R., Savaidis, G., Michailidis, N., 2017. Optimizing the development and manufacturing of 56SiCr7 leaf springs. International Journal of Fatigue, 103, pp.168-175.
Zulkarnaini, R., Hamdani, H., Saputra, E., 2023. Evaluasi Sifat Mekanik Baja Pegas Daun Mobil Isuzu Panther. Jurnal Mesin Sains Terapan, 7 (1), pp.14-18.
Adawiyah, R., Murdjani, M., Hendrawan, A., 2014. Pengaruh Perbedaan Media Pendingin Terhadap Strukturmikro Dan Kekerasan Pegas Daun Dalam Proses Hardening. Jurnal poros teknik, 6 (2), pp.96-102.
Hariningsih, H., Riyadi, T. W. B., 2021. Effect of hardening and tempering on the microstructure and mechanical properties of the tapered-forged leaf spring steel. In Materials Science Forum, 1029, pp. 25-32.
E04 Committee. (2022). Test Method for Microindentation Hardness of Materials. ASTM International. doi, 10.
Omar, M. A., Shabana, A. A., Mikkola, A., Loh, W. Y., Basch, R., 2004. Multibody system modeling of leaf springs. Journal of Vibration and Control, 10 (11), pp.1601-1638..
Xu, T. X., Salamon, N. J., 1988. Leaf spring design: effects of friction and interleaf gaps. In Spring National Design Engineering Show and Conference, pp. 7-10.
