Perancangan Kalkulator Elemen Mesin untuk Perencanaan Poros

Hendri Suryanto; Eva Hertnacahyani Herraprastanti; Retno Wahyusari; Helmi Gunawan

doi:10.30630/jtm.18.1.1857

Hendri Suryanto Program Studi Teknik Mesin, Sekolah Tinggi Teknologi Ronggolawe
Eva Hertnacahyani Herraprastanti Program Studi Teknik Mesin, Sekolah Tinggi Teknologi Ronggolawe
Retno Wahyusari Program Studi Informatika, Sekolah Tinggi Teknologi Ronggolawe
Helmi Gunawan Program Studi Teknik Mesin, Sekolah Tinggi Teknologi Ronggolawe

DOI: https://doi.org/10.30630/jtm.18.1.1857

Keywords: transmission shaft, torque, power, bending, Matlab GUI

Abstract

To design a transmission shaft requires quite complicated calculations, the calculation time is also quite long and the calculations must be careful because they are done manually, as has been done so far. The calculation results must also be accurate because the size of the shaft that does not meet the requirements can result in failure. To meet these needs, calculations in shaft design can be done with a tool, namely a software application that is run on a computer. The purpose of this study is to produce a software application or machine element calculator for shaft planning using the Matlab GUI, and to increase the efficiency of shaft planning in terms of time. This machine element calculator is designed by selecting the Matlab GUI menus according to the calculation formulas for the torsional load shaft diameter, namely Edit Text, Static Text, Panel and Push Button. Then arrange and edit the GUI menus through the Property Inspector and create a program (Matlab Code) for calculating the shaft diameter through the Callback menu. With this calculator, calculations in transmission shaft planning can be accelerated, which is an average of 24.8 minutes faster than manual calculations, which is an average of 34.8 minutes.

References

Uicker Jr, J., Pennock, G.R., Shigley, J.E., 2017. Theory of Machines and Mechanisms. 5th ed. New York: Oxford University Press.

Herraprastanti, E.H., 2018. Buku Ajar Metode Numerik Aplikasi & Optimasi dengan GNU Octave. 1st ed. Surabaya: JDS Surabaya.

Allaka, G., Kalidindi, P.R., Rao, K.S., Daadi, M., Patnala, A. 2012. Design Of Solid Shafts Using Matlab. Int. J. Mech. Eng. Technol, 3 (3), pp. 645–653.

Pratama, A.W., 2017. Rancang Bangun Software Desain Poros Roda Traktor Tangan Menggunakan Visual Basic, Sarjana. Universitas Muhammadiyah Surakarta.

Muhammad, C.R., 2019. Perancangan Kalkulator Elemen Mesin Berbasis Android Guna Meningkatkan Efisiensi Perencanaan Elemen Mesin, Sarjana. Universitas Jember.

Anakhu, P.I., Abiodun, A., Abioye., Bolu, C.A., Azeta, J., 2018. Modeling of the kinematic geometry of spur gears using matlab. In: MATEC Web Conf., ICMME 2017, Kuala Lumpur, Malaysia, 28-30 November 2017. EDP Sciences: Les Ulis, France.

Sudiar, A., 2016. Implementasi Dan Perancangan Aplikasi Pada Perencanaan Bantalan Dan Bearing. Jurnal Poros Teknik, 8 (2), pp. 73 – 78.

Bhirawa, W.T., 2015. Penggunaan Google Sketch Up Software Dalam Merancang Kopling Flens. Jurnal Teknologi Industri, 4, pp. 1 – 7.

Gabrial, B., Tangkuman, S., and Rantung, J. 2024. Rancang Bangun Aplikasi Perancangan Roda Gigi Lurus Menggunakan Bahasa Pemrograman Python. Jurnal Tekno Mesin, 10 (1), pp. 1 – 8.

Tangel, D., Tangkuman, S., Luntungan, H., 2016. Aplikasi Spreadsheet Pada Perancangan Roda Gigi Lurus. Jurnal Poros Teknik Mesin Unsrat, 5 (2), pp. 103 – 111.

Sularso., Kiyokatsu, S., 2004. Dasar Perencanaan dan Pemilihan Elemen Mesin, 11th ed. Jakarta: PT. Pradnya Paramita.