Identifikasi Root Cause Produk NG Master Cylinder di PT X

Lazuardi Allan Suryawan; Boni Sena; Achmad Azis Rahmanto

doi:10.30630/jtm.18.1.1773

Lazuardi Allan Suryawan Teknik Mesin,Fakultas Teknik, Universitas Singaperbangsa Karawang
Boni Sena Teknik Mesin,Fakultas Teknik, Universitas Singaperbangsa Karawang
Achmad Azis Rahmanto Teknik Mesin,Fakultas Teknik, Universitas Singaperbangsa Karawang

DOI: https://doi.org/10.30630/jtm.18.1.1773

Keywords: braking system, fluid leakage, master cylinder, fading, corrosion, routine maintenance.

Abstract

The braking system is a crucial component in vehicles, responsible for reducing speed or halting the vehicle safely. However, several technical issues, such as brake fluid leakage, can compromise braking performance. Leaks can occur in hydraulic lines, the master cylinder, or brake calipers, leading to reduced hydraulic pressure and ineffective braking. Other issues like wear on components, excessive heat causing fading, and corrosion or contamination of brake fluid further degrade braking performance. The master cylinder plays a vital role in converting mechanical pressure into hydraulic pressure to operate the brake caliper. Damages such as fluid leaks, wear, corrosion, or contamination can impair this function, increasing the risk of accidents. Factors contributing to failures include poor material quality, machine setting errors, and inadequate maintenance. Regular inspection and maintenance of these components are essential to ensure vehicle safety and optimal braking performance.

References

Anang Suryana, et al., 2022. Automatic gas control system in the motorcycle braking process with the concept of non-uniform slowing down motion. Fidelity: Jurnal Teknik Elektro, 2(3), pp.51–56.

Towoju, O., 2019. Braking pattern impact on brake fade in an automobile brake system. Journal of Engineering Sciences, 2(2), pp.11–16.

Ditya, D.J. and Fitri, S.P., 2023. Performance simulation of hybrid refrigeration system using eutectic salt PCM for eco reefer container. IOP Conference Series: Earth and Environmental Science, 1166(1).

Ramarathnam, S., Dhar, S., Darbha, S. and Rajagopal, K.R., 2009. Development of a model for an air brake system with leaks. Proceedings of the American Control Conference, (September 2016), pp.1134–1139.

Zhao, C., Ding, H., Cao, G. and Hou, H., 2021. Research on automatic detection technology for the compensation hole shape and position parameters of a brake master cylinder. Advances in Mechanical Engineering, 13(7), pp.1–16.

Motta, M., Fedrizzi, L. and Andreatta, F., 2023. Corrosion stiction in automotive braking systems. Materials (Basel), 16(10).

Krishnanunni, S., Paul, J. and Prakash, R.S., 2024. Coating solutions for enhancing automotive brake disc durability against corrosion and wear—A review. Engineering Research Express, 6(2).

Tigane, R., et al., 2021. On the local corrosion in a thin layer of electrolyte separating two materials: Specific aspects and their contribution to pad-to-disk stiction in automobile brake system. Journal of Solid State Electrochemistry, 25(3), pp.895–904.

Susilawati, A., Atmadio, N., Siswanto, H. and History, P., 2018. Tool path optimization and cost analysis for manufacturing process of master cylinder piston of motorcycle brake. Journal of Ocean, Mechanical and Aerospace-Science Engineering, 55(55), pp.1–5.

Zhao, C., Ding, H., Cao, G. and Zhang, Y., 2021. A new method for detecting compensation hole parameters of automobile brake master cylinder based on machine vision. Journal of Advanced Transportation, 2021.