Analisa Kapasitas Mesin Pencacah Multi Mixer Pakan Ayam KUB

Muchlisinalahuddin Muchlis nalahuddin; Hendrix Triwaldi; Desmarita Leni; Aulia Naro; Deviya Aprilman

doi:10.30630/jtm.17.1.1224

Muchlisinalahuddin Muchlis nalahuddin Jurusan Teknik Mesin, Fakultas Teknik, Universitas Muhammadiya Sumatera Barat
Hendrix Triwaldi Jurusan Teknik Mesin, Fakultas Teknik, Universitas Muhammadiya Sumatera Barat
Desmarita Leni Jurusan Teknik Mesin, Fakultas Teknik, Universitas Muhammadiya Sumatera Barat
Aulia Naro Industrial Engineering, Universitas Mercu Buana, Indonesia
Deviya Aprilman Jurusan Teknik Mesin, Politeknik Raflesia

DOI: https://doi.org/10.30630/jtm.17.1.1224

Keywords: capacity analysis, chicken feed, chopper, stirrer, multi mixer

Abstract

In this study, the capacity analysis of the multi mixer chopper machine was carried out with the parameters applied such as: rpm, time and input and output of the machine in terms of the weight of the input material and the output of the feed produced in order to calculate the performance and capacity of the KUB chicken feed multi mixer chopper. (Balitbangtan superior native chicken). In the process of analyzing the capacity of the multi mixer chopping machine for kub chicken feed, the preparations made include preparing tools and materials for testing, testing, data collection, analysis and proceed with drawing conclusions. In data collection, enumeration and mixing tests will be carried out, where the samples of the test materials used are vegetable waste, bran and water. The largest chopped output at the initial input with a weight of 1 kg is obtained from the engine speed of 2895 rpm with a chopped weight of 0.95 kg. A suitable ratio for the feed mix is 1 kg of vegetable waste, 1 kg of bran and 2 kg of water. So the capacity of the multi-mixer chopping machine is known to be 239.521 kg/hour with a material ratio of 1 kg of chopped vegetable waste, 1 kg of bran and 2 kg of water.

References

C. Devendra and R. A. Leng, “Feed resources for animals in Asia: Issues, strategies for use, intensification and integration for increased productivity,” Asian-Australasian J. Anim. Sci., vol. 24, no. 3, pp. 303–321, 2011, doi: 10.5713/ajas.2011.r.05.

I. G. N. . Bidura, “Bahan ajar pakan ternak rumniansia strategi pemberian pakan,” Bahan Ajar Pakan Ternak Rumniansia Strateg. Pemberian Pakan, pp. 1–85, 2016.

L. Wangi, W. Busono, and M. Nasich, “The Effect of Different Seasons and Land Types Towards The Performance of Bali Cattle Production in Southeast Sulawesi,” Res. J. Life Sci., vol. 4, no. 3, pp. 168–178, 2017, doi: 10.21776/ub.rjls.2017.004.03.2.

of Sciences Engineering and Medicine, Nutrient Requirements of Dairy Cattle: Eighth Revised Edition. Washington, DC: The National Academies Press, 2021. doi: 10.17226/25806.

M. Sitorus, G. Sembiring, Idham Kamil, and J. S. Tarigan, “Teknologi Tepat Guna Pencacah Serbaguna Untuk Peternak Lembu Di Dusun VIII Desa Bangun Rejo Tanjung Morawa,” JUBDIMAS ( J. Pengabdi. Masyarakat), vol. 1, no. 1, pp. 6–10, 2022, doi: 10.59663/jubdimas.v1i1.17.

M. Mustofa, W. Sudai, and S. Haluti, “Rancang Bangun Mesin Pembuat Pakan Ternak,” J. Teknol. Pertan. Gorontalo, vol. 8, no. 1, pp. 28–33, 2023, doi: 10.30869/jtpg.v8i1.1165.

I. bagus G. Partama, Anatomi Hewan Vetebrata, vol. 1, no. 2019.

Margono, N. T. Atmoko, B. H. Priyambodo, Suhartoyo, and S. A. Awan, “Rancang Bangun Mesin Pencacah Rumput Untuk Peningkatan Efektivitas Konsumsi Pakan Ternak Di Sukoharjo,” Abdi Masya, vol. 1, no. 2, pp. 72–76, 2021, doi: 10.52561/abma.v1i2.132.

F. Saputra, J. Achmadi, Dan, and E. Pangestu, “Efisiensi Pakan Komplit Berbasis Ampas Tebu Dengan Level Yang Berbeda Pada Kambing Lokal,” Anim. Agric. J., vol. 2, no. 4, pp. 137–147, 2013, [Online]. Available: http://ejournal-s1.undip.ac.id/index.php/aaj%0A

A. P. Putra, M. Sochib, and Masrufaiyah, “Perancangan Mesin Pencacah Pakan Ternak Serbaguna Dengan Kapasitas 300 kg/jam,” Tek. Mesin, vol. 08, no. 1, pp. 16–26, 2019.

N. T. Atmoko, A. Jamaldi, Suhartoyo, and Y. Y. K, “Rancang Bangun Mesin Mixer Pencampur Pakan Ternak Sapi,” Pros. Semin. Nas. Unismu, vol. 3, pp. 925–926, 2020,

G. A. Ibrahim, A. Hamni, and L. Afriani, “Pembuatan Mesin Cetak Pelet Pakan Ternak Berbahan Baku Onggok Untuk Kelompok Peternak Sapi di Terbanggi Subing Lampung Tengah,” Dharma Raflesia J. Ilm. Pengemb. dan Penerapan IPTEKS, vol. 18, no. 2, pp. 269–279, 2020, doi: 10.33369/dr.v18i2.12949.

N. Sari, I. Salim, and M. Achmad, “Uji Kinerja Dan Analisis Biaya Mesin Pencacah Pakan Ternak (Chopper),” J. Agritechno, vol. 11, no. 2, pp. 113–120, 2018, doi: 10.20956/at.v11i2.115.

Mustofa, W. Sundai, and S. Haluti, “Rancang Bangun Mesin Pembuat Pakan Ternak,” vol. 8, no. 1, pp. 28–33, 2023.