Perancangan Mesin Pemipil Jagung Dengan Poros Gerigi Berpenggerak Gasoline Engine
Abstract
Corn is the main food after rice, corn has the same nutritional value of protein, carbohydrates, and calories as rice. In everyday life, corn, in addition to being used as a food ingredient, can also be used as an industrial raw material and animal feed. But in the processing process, there are still difficulties if done manually because it takes a long time to shell corn kernels before being processed into corn-based foods. Therefore, a tool is needed to support the availability of corn quickly and support corn productivity. So, the author designed a corn sheller machine that can increase time efficiency. From the results of the design of the components used in the corn sheller machine, the diameter of the shaft used was at least 28 mm, the v-belt used was typed A with a length of 40 inches totaling 2 pieces, a drive pulley with a diameter of 2 inches, a pulley that was driven by 6 inches in diameter, the key used were 8mm x 7mm x 18mm, and used a gasoline engine with a power of 5.5 Hp. After the shelling test obtained capacity 360 kg per hour.
References
B. Indonesia, (2021), Analisis Produktivitas Jagung dan Kedelai di Indonesia, 27 7 2021. [Online]. Available: https://www.bps.go.id. [Accessed 16 7 2022].
B. Rudini and F. Ayustaningwarno, (2013), Kadar Protein, Serat, Triptopan dan Mutu Organoleptik Kudapan Ekstrusi Jagung Dengan Substitusi Kedelai, Journal of Nutrition College, vol. 2, no. 3, pp. 373-381.
S. N. Susi and S. U. Lestari, "Komparasi Tampilan dan Hasil Lima Varietas Jagung Manis (Zea mays saccharata, Sturt) di Kota Penkanbaru," Jurnal Ilmiah Pertanian, vol. 13, no. 1, pp. 31-37, 2016.
Haryoto, (1996), Teknologi Tepat Guna: Membuat Alat Pemilih Jagung, Yokyakarta: Kanisius.
R. W. Arief, R. Asnawi and N. Richana, (2015), Penganekaragaman Pangan Olahan Jagung dan Analisis Kelayakannya Secara Ekonomi di Kecamatan Pekalongan Kabupaten Lampung Timur, in Seminar Nasional Swasembada Pangan Politeknik Negeri Lampung, Bandar Lampung.
L. L. N. E. Hasanah and D. Isfianadewi, (2019), Diverifikasi Pangan Olahan Jagung Manis Sebagai Upaya Pengembangan Agroindustri di Desa Soropaten, Jurnal Pengabdian Masyarakat J-DINAMIKA, vol. 4, no. 1, pp. 28-33.
D. Harsokoesoemo, "Pengantar Pereancangan Teknik," Bandung, ITB, 2004.
M. F. Pomalingo, A. S. Ginting and S. Botutihe, (2018), Pengujian Karakteristik Fisik Jagung Bisi 2 Untuk Mendesain Mesin Pemipil Jagung Portabel, JTech, vol. 6, no. 2, pp. 36-40.
I. Surya and T. Pujianto, (2018), Perancanagan Alat Pemipil Jagung, Jurnal Teknik Mesin UBL, vol. 5, no. 2, pp. 19-26.
L. Fitriane, (2016), Rancangbangun Mesin Pengolah Cangkang Telur Menjadi Tepung Untuk Bahan Water Soluble Calcium, Institut Teknologi Sepuluh November, Surabaya.
R. Khurmi and J. Gupta, (2015), Machine Design (S.I. Units), New Delhi: Eurasia Publishing House (PVT.) LTD, 2015.
S. and K. Suga, (2004) Dasar Perencanaan Dan Pemilihan Elemen Mesin, Jakarta: Pradnya Paramita.
J. Adri, B. Rahim and N. Erizon, (2019) "Inovasi Mesin Pengolahan Pakan Dengan Konsentrat," Junal Sains dan Teknologi, vol. 19, no. 1.
